Brother DK-2210 labels for Shopify

LabelCraft - barcode labels for Shopify that print at exactly the size you set.

The guarantees behind every label

Exact to ±0.1 mm

Every label prints at the size you set - measured, not approximate.

Never a silent failure

Overflow or a missing barcode always raises a visible warning before you print.

Whole-dot barcodes

Every bar lands on whole printer dots, so codes stay crisp and scan first time.

Your barcodes, untouched

We never overwrite or reassign a product's existing barcode.

Brother DK-2210 is the narrow 29 mm continuous roll - shelf-edge strips, cable wraps, small tags. Narrow is the operative word for barcodes: here is exactly what fits.

Exact size, in mm and inches

This is a continuous roll: 29 mm (1.14 in) wide, with no fixed label length - LabelCraft cuts each label to the length its content needs. The preset's stored height is a default cut length, not a stock dimension.

Will a barcode scan at this size?

EAN-13 / UPC-A: scannable, but tight. The barcode box is 26 mm against a 19.1 mm floor at 300 dpi - keep the box as wide as the label allows and scan a printed sample before a full run.
Code 128 (SKU barcodes): only up to 8 worst-case characters fit scannably at this width - longer SKUs drop below the scan floor. Print the product's EAN/UPC instead, or pick a wider label.

These verdicts come from the same pre-flight engine the app runs before every print: a barcode's narrow bars must land on whole printer dots (at least 2 dots per module), so the floor is exact, not a rule of thumb. Longer explanation in minimum barcode size and why a barcode won't scan.

What prints it

A Brother DK size: it runs on the QL and TD families - QL-800 (300 dpi), QL-1100 (300 dpi), QL-700 (300 dpi), TD-4420DN (203 dpi), TD-4520DN (300 dpi). LabelCraft checks the template's DPI against your printer's native resolution and warns when the bars would land off the dot grid - see 203 vs 300 DPI.

Printing this format from Shopify

In LabelCraft, pick Brother DK-2210 (29 mm continuous) in the template picker: the barcode box, the text autofit and the pre-flight checks above are already sized for this exact label. The free plan prints 200 labels a month - enough to validate the format on your own printer before it costs anything.

Install free - 200 labels per month →

More on sizes: the full label size chart, which label size do I need, the Brother setup guide - or contact LabelCraft support.

Related guides

Not ready to install? Try the no-install demo and measure a real label

Still stuck after this guide? Get help from a human