Does a Shopify Barcode App Multiply Your Case or Pack Quantities?

LabelCraft - barcode labels for Shopify that print at exactly the size you set.

EN · FR · DE · ES

The guarantees behind every label

Exact to ±0.1 mm

Every label prints at the size you set - measured, not approximate.

Never a silent failure

Overflow or a missing barcode always raises a visible warning before you print.

Whole-dot barcodes

Modules snap to your printer's dots, so codes stay crisp and scan first time.

Your barcodes, untouched

We never overwrite or reassign a product's existing barcode.

You are about to import a supplier purchase order or a Stocky export, and one of the columns is Case Qty or Pack Size - a 12, a 24, a 6. The worry is reasonable: if the app reads that column and multiplies it, one line of 40 products could turn into hundreds of labels and burn a whole roll. Here is the short, direct answer for LabelCraft, and exactly how it treats a case or pack column.

The short answer: no, LabelCraft never multiplies a case or pack column

The number LabelCraft prints is the number you map and confirm - one row, that quantity, exactly that many labels. It does not read a “Case Qty” of 12 and silently turn one line into twelve labels, and it never multiplies one column by another. Nothing is multiplied behind your back.

Why this matters when you move off Stocky

Stocky exports and supplier packing lists almost always carry a case or pack column right next to the unit count, because that is how stock is ordered and delivered. A tool that quietly multiplied the two would waste a roll on your very first receive - exactly the kind of silent surprise you are leaving Stocky to avoid. If you are planning that move, the Stocky cutover checklist and the receiving-barcode-labels guide walk through the whole flow.

How LabelCraft handles a case, pack, inner-pack or UOM column

When your file's header row names a case-style column, LabelCraft notices it and shows a calm confirm note before you print, rather than guessing what you meant. It recognizes the common header names for this:

Case, Case Qty, Case Quantity, Case Pack, Case Size - the outer case a product ships in.
Pack, Packs, Pack Size, Pack Qty, Pack Quantity - an inner multipack.
Inner, Inner Pack, Inner Qty - a sub-pack inside the case.
Carton, Carton Qty - a shipping carton count.
UOM (unit of measure) - a column that flags each / case / pack rather than a raw number.

When any of those is present, the confirm note asks you to check that the number shown is the number of labels you want - because only you know whether a “12” means “12 labels” or “one case of 12”. LabelCraft prints exactly the number you confirm and never multiplies it by a pack size. Nothing is assumed and nothing is multiplied; the column is a prompt to look, not an instruction to expand.

Stocktake and adjustment columns count the same way

A stocktake or adjustment column is read as a plain count too, never a formula. A positive adjustment prints that many labels; a negative adjustment prints zero, never a negative or an invented number; a value too large to be a real count is refused outright rather than rounded into garbage. As everywhere in LabelCraft, an unusable number is surfaced, never silently guessed.

What to do at import time

Export or paste your supplier PO, received-quantities list, or Stocky CSV into the LabelCraft importer.
Map the one quantity column that already holds the number of labels you want - the unit count, or the case count, whichever you intend to print.
If a case, pack, inner-pack or UOM column is present, read the confirm note and glance at the number before printing.
Print. Exactly that many labels come out, at the size you picked, to ±0.1 mm - never a multiplied pile.

Frequently asked

I have a Case Qty column of 12 - will it print 12 labels per product?

Only if 12 is the number in the quantity column you map. LabelCraft prints the quantity you map and confirm, not a case size it happens to find in another column. Want one label per case? Map the case count. Want one per unit? Map the unit count.

Does the Pack Size column get multiplied into the unit count?

No. LabelCraft never multiplies one column by another, so a “Pack Size” of 6 does not turn a quantity of 10 into 60 labels. Pick the single column that already holds the number of labels you want to print.

My supplier list mixes units and cases - how do I not get it wrong?

Map the column that means “labels to print”, and let the case/pack confirm note be your second check. It exists precisely so a mixed list can't silently print the wrong count. For matching that list to your catalog first, see matching a supplier list by barcode and the carton and case label guide.

Install free - 200 labels per month →

Moving your receiving off Stocky? Start with the Stocky cutover checklist and the receiving guide, or contact LabelCraft support to sanity-check your first import.